For data storage, the global radiation sensor (Pyranometer) is considered as part of the Special Meteorological Instrumentation.

Summary

A pyranometer is used for measuring solar irradiance on a planar surface and it is designed to measure the solar radiation flux density (W/m2) from the hemisphere above within a wavelength range 0.3 μm to 3 μm

Manufacturer Kipp and Zonen
Model CMP11
Serial No. 080012
Type meteorological package
REGISTRY-Link ↪ REGISTRY (8567)


Contacts

Name Institution Role
Ralf Krocker Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research Engineer In Charge, Device Contact
Daniela Voss Carl von Ossietzky University of Oldenburg Editor

Position

Infoxyz-position of pyranometer from Alignment Survey Report RV Heincke (January 2016), located on foremast of RV Heincke
X50.39 m
Positive X axis is forward and along the centerline of the vessel with X0 at the Stern point of the vessel.
Y0.116 m
Positive Y axis is portside of centerline with Y0 at centerline at the Very stern point of the vessel.
Z19.529 m
Positive Z axis is upwards of basis. Z0 is set to the hydrophone on midship.

Data logging, storage and archiving

Logged parameters

Parameter O2ARegistry Output Type Unit
global radiation global radiation W/m2

Central geographical ship's position and time standard

Time synchronization and geographical positioning is done by DShip receiving the data for logging.

Rawdata storage on board

Data storage in DShip system.

DShip

Uncorrected measurement data.

|| Device name | Special Meteorological Instrumentation |
|| Parameters | Global radiation (W/m²) |

Data archiving on land

After the cruise the DShip data set can be extracted from https://dship.awi.de/.

Documentation


 

OSZAR »